Reference Guide

from 1 to maximum number of indexes a particular group supports. If -i <index> is not specied, a value
of 1 is assumed for groups, which are tables that have multiple entries. The index is specied by the index
value, not a named value.
'nx' is allowed for servers.
• -c — This option performs validation but do not congure.
Output
This subcommand generates error output for any of the following reasons:
• Invalid syntax, group name, object name, index or other invalid database members.
• If the RACADM command-line interface is unsuccessful.
Examples
• To congure a single property of a group:
racadm config -g cfgSerial -o cfgSerialBaudRate
• Modify a user password:
racadm config -g cfgUserAdmin -o cfgUserAdminPassword -i 3 newpassword
• Congure a RAC from a conguration le:
racadm config -f config.txt
• Congure a RAC from a conguration le and continue if a group fails to get congured:
racadm set -f config.txt --continue
coredump
Description Displays detailed information related to any recent critical issues that have occurred with iDRAC. The
coredump information can be used to diagnose these critical issues.
If available, the coredump information is persistent across iDRAC power cycles and remains available
until either of the following conditions occur:
The coredump information is deleted using the coredumpdelete subcommand.
For more information about clearing the coredump, see the coredumpdelete.
NOTE: To use this subcommand, you must have the Execute Debug privilege.
Synopsis
racadm coredump
Example
• racadm coredump
There is no coredump currently available.
• racadm coredump
Feb 19 15:51:40 (none) last message repeated 5 times
Feb 19 15:52:41 (none) last message repeated 4 times
Feb 19 15:54:12 (none) last message repeated 4 times
Feb 19 15:56:11 (none) last message repeated 2 times
Feb 22 11:46:11 (none) kernel:
coredumpdelete
Description
Deletes any currently available coredump data stored in the RAC.
To use this subcommand, you must have Execute Debug Command permission.
NOTE: If a coredumpdelete command is issued and a coredump is not currently stored in the RAC,
the command displays a success message. This behavior is expected. See the coredump
subcommand for more information about viewing a coredump.
Synopsis
racadm coredumpdelete
25