Reference Guide

System.Power.RedundancyCapabilities (Read Only)
Description
Returns the redundancy capabilities in the form of a bitmask. This bitmask indicates the values that are set to
cfgSensorRedundancyPolicy.
NOTE: This object is not applicable for iDRAC on Blade servers.
Legal Values
• 0 — not applicable
• 1 — Non-Redundant
• 2 — 1+1 Redundant
• 4 — 2+1 Redundant
• 8 — 2+2 Redundant
• 16 — 3+x Redundant
• 32 — 4+x Redundant
• 64 — 5+x Redundant
Default Value
0 — not applicable
Write Privilege Not Applicable
License Required Not Applicable
Dependency Not Applicable
System.Power.RedundantState (Read Only)
Description
Retrieves the redundancy state for the chassis.
NOTE: This object is not applicable for Rack and Tower server.
Legal Values
• 0 — None
• 1 — Full
Default 0 — None
Write Privilege Not Applicable
License Required Not Applicable
Dependency Not Applicable
System.Power.Supply
This group provides information relating to the Power Supplies.
This group is indexed from 1 to 4. If there are less than four power supplies on the server, then some of the last indexes of this group
are not applicable. This group is applicable for iDRAC on Rack and Tower servers.
The following section provides information about the objects in this group.
System.Power.Supply.CurrentDraw (Read Only)
Description
Displays the instantaneous current consumption in 0.1 amps.
Legal Values
String of up to 254 ASCII characters
189