Reference Guide
The following sections provide information about the objects in the cfgRemoteHosts group.
cfgRhostsFwUpdateTftpEnable (Read or Write)
Description
Enables or disables rmware update from a network TFTP server.
NOTE: This object is read-only for iDRAC Modular servers.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
1
cfgRhostsFwUpdateIpAddr (Read or Write)
Description
Species the network TFTP server IPv4 or IPv6 address that is used for TFTP rmware update operations.
Legal Values
A string representing a valid IPv4 or IPv6 address. For example, 192.168.0.61
Default
For IPv4, it is 0.0.0.0
cfgRhostsFwUpdatePath (Read or Write)
Description
Species TFTP path where rmware image le exists on the TFTP server. The TFTP path is relative to the
TFTP root path on the TFTP server.
NOTE: The server may still require you to specify the drive (for example, C:).
Legal Values
A string with a maximum length of 255 ASCII characters.
Default
<blank>
cfgRhostsSmtpServerIpAddr (Read or Write)
Description
The IPv4 or IPv6 address of the network SMTP server.
The SMTP server transmits email alerts from iDRAC if the alerts are congured and enabled.
Legal Values
A string representing a valid SMTP server IPv4 or IPv6 address. For example: 192.168.0.2.
Default
For IPv4, it is 0.0.0.0
cfgRhostsSyslogEnable (Read or Write)
Description
To allow the RAC and SEL logs to be written to up to three remote syslog servers Enables or disables remote
syslog.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
108