Release Notes

Versions/ Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 38:
Description
When you update the rebrand image from the iDRAC web interface, the system reboots and the rebranded images are
applied successfully. During POST, if you press <F10>, the Lifecycle Controller UI starts to launch. The progress bar
displays till 90% and then the system starts rebooting.
Resolution
After rebranding, do not access the Lifecycle Controller UI.
Versions/ Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 39:
Description
If the number of physical or virtual disks selected for identification is more than 100, the blink or unblink operation
fails without displaying any message.
Resolution
Select less than 100 physical or virtual disks, or the required disk and retry the operation.
Versions/ Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 40:
Description
Chassis slots mapped to the server are not visible using the WS-MAN DCIM_Slot class enumeration. DCIM_slot class
provides the server hardware information in terms of available and occupied slots where devices can be added or
removed respectively.
Resolution
None
Versions/ Systems Affected
All Dell Modular PowerEdge systems with iDRAC8.
Issue 41:
Description
While importing or replacing license files using Google Chrome or Microsoft Internet Explorer, the operation fails for
certain license files.
Resolution
Import or replace the license files using other supported browser(s) or using other interfaces such as RACADM,
Lifecycle Controller, and so on.
Versions/ Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 42:
Description
When the physical drives connected to a PERC storage controller are in Non-RAID (or unitialized) state, the size
reported by the iDRAC interfaces (WS-MAN, RACADM, and iDRAC GUI) is slightly less than the actual size of the
drive.