Release Notes

Issue 28:
Description
On the Dell 13
th
generation PowerEdge servers, after replacing the motherboard, if you use the Easy Restore feature to
restore the UEFI Diagnostic utility, the UEFI Diagnostic is restored successfully. However, the iDRAC web interface
may not show the restored Diagnostic version in the System Inventory page.
Resolution
Reset iDRAC.
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 29:
Description
On the Dell 13
th
generation PowerEdge servers, a clone export of a system with 64 virtual disks does not recreate the
virtual disks on the target system.
Resolution
On Clone or Replace modes of Configuration XML export, the virtual disk creation operation is set to CreateAuto by
default. Change the operation to Create and specify the physical disks to be used by FQDD to resolve this issue.
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 30:
Description
(Virtual) Keyboard stopped working on iDRAC Virtual Console, but the mouse movements continues to work.
Resolution
Exit and restart Virtual Console. If the Virtual Media was in use, ensure that it is activated (Connect and Map media).
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 31:
Description
Infrequently, iDRAC logs the following message to the Lifecycle Controller log:
PWR2262 "The Intel Management Engine has reported an internal system error."
Also, logs the following within the next few minutes:
PWR2264 "The Intel Management Engine has reported normal system operation."
Resolution
No action required.
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 32:
Description
In the iDRAC web interface, the following storage pending operations status is not displayed in Pending Operations
pop-up message and Storage->Pending Operations page:
• Virtual Disk(s) - Encrypt operations.
• Controller(s) - Create, Modify, or Delete security key operations.