Reference Guide

• Reset when vFlash Partition creation is in progress.
racadm racresetcfg
A vFlash SD card partition operation is in progress. Resetting the iDRAC may corrupt
the vFlash SD card. To force racresetcfg, use the -f flag.
remoteimage
Description Connects, disconnects, or deploys a media file on a remote server.
To run this subcommand, you must have the Configure Chassis Administrator privilege.
Synopsis
• racadm remoteimage [-m <module> | -a]
• racadm remoteimage -d [-m <module> | -a]
• racadm remoteimage -s [-m <module> | -a]
• racadm remoteimage -c [-m <module> | -a] [-u <username> -p
<password> -1 <image_path>]
• racadm remoteimage -e [-m <module> | -a] [-u <username> -p
<password> -1 <image_path>]
Input
• -c — Connect the image.
• -d — Disconnect image.
• -u — User name to access the network share.
• -p — Password to access the network share.
• -l — Image location on the network share; use single quotation marks around the
location.
• -s — Display current status.
NOTE: Use a forward slash (/) when providing the image location. If backward slash
(\) is used, override the backward slash for the command to run successfully.
For example:
racadm remoteimage -c -u user -p xxx -l /\/
\192.168.0.2/\CommonShare/\diskette
NOTE: The following options only apply to connect and deploy actions
• -u — Username.
For domain users, you can use the following formats:
– domain/user
– domain\user
– user@domain
• -p — Password
Example
• Configure a Remote image.
racadm remoteimage -c -u "user" -p "xxx" -l //shrloc/foo.iso
Remote Image is now Configured
• Disable Remote File Sharing.
racadm remoteimage -d
Disable Remote File Started. Please check status using -s
option to know Remote File Share is ENABLED or DISABLED.
71