Reference Guide

Input -m <module> — Must be one of the following values:

• chassis

• server-<n> — where n = 1–16

• server-<nx> — where n = 1–8; x = a, b, c, d (lower case)

• switch-<n> — where n = 1–6

Output Any system tag as applicable.

Example

• Display Service tag of Server in Slot 1

racadm getsvctag -m server-1

• Display Service tag of all the components in the chassis

racadm getsvctag

getsysinfo

Description

Displays information related to iDRAC, managed system, and watchdog configuration.

NOTE: The host name and OS Name fields in the getsysinfo output display accurate

information only if the Dell OpenManage Server Administrator is installed on the

managed system. Else, these fields may be blank or inaccurate. An exception to this

are VMware operating system names, which are displayed even if the Server

Administrator is not installed on the managed system.

Synopsis

racadm getsysinfo [-d] [-A] [-c] [-4] [-6]

Input

• —4 — Displays IPv4 settings

• —6 — Displays IPv6 settings

• —c — Displays common settings

• —d — Displays iDRAC information

• —A — Eliminates the printing of headers or labels

Output

RAC Information:

RAC Date/Time = Thu Sep 3 17:25:06 2015

Firmware Version = 2.20.20.20

Firmware Build = 41

Last Firmware Update = 09/02/2015 22:18:35

Hardware Version = 0.01

MAC Address = B8:2A:72:FC:4F:B0

Common settings:

DNS RAC Name = ipmierrata

Current DNS Domain = sha512.com

Domain Name from DHCP = Disabled

IPv4 settings:

Enabled = 1

Current IP Address = 10.94.195.33

Current IP Gateway = 10.94.195.1

Current IP Netmask = 255.255.255.0