Reference Guide

IPv6 DNSServer Address 0: fec0:0:0:ffff::1

IPv6 DNSServer Address 1: fec0:0:0:ffff::2

IPv6 DNSServer Address 2: fec0:0:0:ffff::3

• To display the details of a particular NIC on the server.

racadm gethostnetworkinterfaces NIC.Integrated.1-1-1

Local Area Connection

Description : Broadcom NetXtreme Gigabit Ethernet

Status : Up

Interface Type : Ethernet

DHCP : Enabled

DHCPServerV4 : 10.94.224.25

MAC Address : 14-FE-B5-FF-B1-9C

FQDD : NIC.Integrated.1-1-1

IPv4 Address : 10.94.225.189

Subnet Mask : 255.255.255.128

IPv6 Address : fe80::7c5f:a114:84d4:17f6

Prefix Length : 64

IPv4 Gateway Address : 10.94.225.129

IPv4 DNSServer Address 0: 10.116.2.250

IPv4 DNSServer Address 1: 10.116.2.251

getled

Description Displays the LED settings on a module: blinking, not blinking, or unknown (for empty

slots).

To run this subcommand, you must have the Login User privilege.

Synopsis

racadm getled

Input

Output

• LED is blinking

• LED is not-blinking

Example

racadm getled

LED State : Blinking

racadm getled

LED State : Not-Blinking

getniccfg

Description

Displays the current and static NIC settings for iDRAC.

Synopsis

racadm getniccfg [-m <module>]

Input

Output

The getniccfg subcommand displays an appropriate error message if the operation is

not successful. Otherwise, the output is displayed in the following format: