Reference Guide

cfgVirMediaFloppyEmulation (Read or Write)
Description
When set to 0, the virtual floppy drive is recognized as a removable disk by Windows
operating systems. Windows operating systems assigns a drive letter that is C: or higher
during enumeration. When set to1, the Virtual Floppy drive is seen as a floppy drive by
Windows operating systems. Windows operating systems assigns a drive letter of
A: or
B:.
NOTE: Virtual Media has to be reattached (using cfgVirMediaAttached) for this
change to take effect.
Legal Values
• 1 (TRUE)
• 0(FALSE)
Default
0
cfgSDWriteProtect (Read Only)
Description
Displays if the physical write protect latch on the SD card is enabled or disabled.
NOTE: This command is deprecated from 12G iDRAC 1.0 release onwards. The
functionality of this command is covered by cfgVFlashSDWriteProtect. While
execution of the cfgSDWriteProtect command is successful, use the
cfgVFlashSDWriteProtect command. For more information, see
cfgVFlashSDWriteProtect Read Only.
Legal Values
• 1 (TRUE)
• 0(FALSE)
Default
0
cfgServerInfo
This group allows you to select the BIOS first boot device and provides the option to start the selected
device only once.
Use this object with the config or getconfig subcommands.
The following sections provide information about the objects in the cfgServerInfo.
cfgServerName (Read Or Write)
Description Displays the name of the specified server.
Legal Values
Maximum of 15 non-extended (ASCII characters (ASCII codes 32 through 126). For more
information, see Guidelines to Quote Strings Containing Special Characters.
Default
SLOT — <slot number>
141