Reference Guide

Default
• For iDRAC on Rack and Tower Servers: 300
• For iDRAC Enterprise on Blade Servers: 1800
cfgSerial
This group contains configuration parameters for the serial configuration. One instance of the group is
allowed.
Use this object with the config or getconfig subcommands.
The following sections provide information about the objects in the cfgSerial group.
NOTE: The cfgSerial object group is applicable for iDRAC Enterprise on Blade Servers for only two
properties — cfgSerialTelnetEnable=1 and cfgSerialSshEnable=1.
cfgSerialBaudRate (Read or Write)
Description
Sets the baud rate on the serial port.
Legal Values
9600, 19200, 57600, 115200
Default
57600
cfgSerialConsoleEnable (Read or Write)
Description
Enables or disables the serial console interface.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
0
cfgSerialConsoleQuitKey (Read or Write)
Description
This key or key combination terminates Virtual Console text for iDRAC when using the
console com2 command.
Legal value: ^ follows any alphabet (a-z, A-Z) ^ follows the listed special characters: [ ] \ ^ _
NOTE: The CTRL key is represented by using the ^ (carat) character.
NOTE: The CTRL key does not generate a character by itself, but must be struck
simultaneously with another key to generate a character.
For example, striking both the CTRL key and the \ key simultaneously (rather than
sequentially) is denoted as ^\.
Configuration options: The value must start with the ^ character, and must follow one
of the characters — a-z, A-Z, [,], \
131