Reference Guide

cfgRhostsSyslogServer1 (Read or Write)
Description
To store the RAC and SEL logs specify the first of three possible remote syslog servers.
This property is only valid if cfgRhostsSyslogEnable is set to 1 (enabled).
Legal Values
String from 0 to 63 characters.
Default
<blank>
cfgRhostsSyslogServer2 (Read or Write)
Description
To store the RAC and SEL logs Specify the second of three possible remote syslog
servers. This property is only valid if cfgRhostsSyslogEnable is set to 1 (enabled).
Legal Values
String from 0 to 63 characters.
Default
<blank>
cfgRhostsSyslogServer3 (Read or Write)
Description
To store the RAC and SEL logs specify the third of three possible remote syslog servers.
This property is only valid if cfgRhostsSyslogEnable is set to 1(enabled).
Legal Values
String from 0 to 63 characters.
Default
<blank>
cfgUserAdmin
This group provides configuration information about the users allowed to access iDRAC through the
available remote interfaces.
Up to 16 instances of the user group are allowed. Each instance represents the configuration for an
individual user.
Use this object with the config or getconfig subcommands. To use the command as follows: -i <index
group>
, supply an index group number
The following sections provide information about the objects in the cfgUserAdmin group.
cfgUserAdminIndex (Read Only)
Description The unique index of a user.
Legal Values
This parameter is populated based on the existing instances.
Default
<index of the instance>
123