Reference Guide

Default
For IPv4, it is 0.0.0.0
cfgRhostsFwUpdatePath (Read or Write)
Description
Specifies TFTP path where firmware image file exists on the TFTP server. The TFTP path
is relative to the TFTP root path on the TFTP server.
NOTE: The server may still require you to specify the drive (for example, C:).
Legal Values
A string with a maximum length of 255 ASCII characters.
Default
<blank>
cfgRhostsSmtpServerIpAddr (Read or Write)
Description
The IPv4 or IPv6 address of the network SMTP server.
The SMTP server transmits email alerts from iDRAC if the alerts are configured and
enabled.
Legal Values
A string representing a valid SMTP server IPv4 or IPv6 address. For example:
192.168.0.2.
Default
For IPv4, it is 0.0.0.0
cfgRhostsSyslogEnable (Read or Write)
Description
To allow the RAC and SEL logs to be written to up to three remote syslog servers
Enables or disables remote syslog.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
cfgRhostsSyslogPort (Read or Write)
Description Remote syslog port number to use for writing the RAC and SEL logs to a remote syslog
server.
Legal Values
10–65535
Default 514
122