Users Guide

3. In the Preference Name column, locate and double-click xpinstall.whitelist.required.

The values for Preference Name, Status, Type, and Value change to bold text. The Status value

changes to user set and the Value changes to false.

4. In the Preferences Name column, locate xpinstall.enabled.

Make sure that Value is true. If not, double-click xpinstall.enabled to set Value to true.

Viewing localized versions of web interface

iDRAC web interface is supported in the following languages:

• English (en-us)

• French (fr)

• German (de)

• Spanish (es)

• Japanese (ja)

• Simplified Chinese (zh-cn)

The ISO identifiers in parentheses denote the supported language variants. For some supported

languages, resizing the browser window to 1024 pixels wide is required to view all features.

iDRAC Web interface is designed to work with localized keyboards for the supported language variants.

Some features of iDRAC Web interface, such as Virtual Console, may require additional steps to access

certain functions or letters. Other keyboards are not supported and may cause unexpected problems.

NOTE: See the browser documentation on how to configure or setup different languages and view

localized versions of iDRAC Web interface.

Updating device firmware

Using iDRAC, you can update the iDRAC, BIOS, and all device firmware that is supported through

Lifecycle Controller update such as:

• Lifecycle Controller

• Diagnostics

• Operating System Driver Pack

• Network Interface Card (NIC)

• RAID Controller

• Power Supply Unit (PSU)

• PCIe Solid-State Drives (SSDs)

• SAS Hard drives

You must upload the required firmware to iDRAC. After the upload is complete, the current version of the

firmware installed on the device and the version being applied is displayed. If the firmware being

uploaded is not valid, an error message is displayed. Updates that do not require a reboot are applied

immediately. Updates that require a system reboot are staged and committed to run on the next system

reboot. Only one system reboot is required to perform all updates.

After the firmware is updated, the System Inventory page displays the updated firmware version and logs

are recorded.

The supported firmware image file types are: