Release Notes

Supported Web Browsers for iDRAC7 and iDRAC8
• Microsoft Internet Explorer 9
•
Microsoft Internet Explorer 10
• Microsoft Internet Explorer 11
•
Safari version 7.1
•
Safari version 8.0
•
Mozilla Firefox version 32
•
Mozilla Firefox version 33
•
Google Chrome version 37
•
Google Chrome version 38
What’s New
• Support for the following PowerEdge systems:
o
PowerEdge FC430
o PowerEdge FD332
• Support for using single iDRAC firmware across Dell 12th and 13th generation PowerEdge servers.
•
Support to switch the controller mode from RAID to HBA and back on PERC 9.1 and later controllers.
•
Enables SSL encryption between client and server using 256 bit or higher.
•
Added racadm proxy support for PowerEdge FX2 chassis. Allows an iDRAC administrator utilizing Chassis
Management at Server (CMAS) to issue a racadm command to CMC using iDRAC.
•
Added event proxy support for PowerEdge FX2 chassis. Allows an iDRAC managing a PowerEdge FX2
CMC utilizing CMAS to display CMC events.
•
Added support for iDRAC Shared LOM on PowerEdge FX2 chassis.
•
Upgraded OpenSSL v1.0.1j; response to CVE-2014-3566 for the "POODLE" issue.
•
Upgraded OpenSSH v6.6; response to CVE-2010-5107, CVE-2014-2532.
•
Added support for QLogic BCM57xx and BCM57xxx NIC cards.
•
Added support for Intel Ethernet Network Adapters X710.
•
Added support for the following Emulex network cards:
o Emulex OneConnect OCe14102-U1-D 2-port PCIe 10GbE CNA
o
Emulex OneConnect OCm14104-U1-D 4-port 10GbE rNDC CNA
o
Emulex OneConnect OCm14102-U5-D 2-port 10GbE Mezz CNA
o
Emulex OneConnect OCm14102-U4-D 2-port 10GbE bNDC CNA
o
Emulex OneConnect OCe14102-N1-D 2-port PCIe 10GbE NIC
o Emulex OneConnect OCm14104-N1-D 4-port 10GbE rNDC NIC
o
Emulex OneConnect OCm14102-N5-D 2-port 10GbE Mezz NIC
o
Emulex OneConnect OCm14102-N6-D 2-port 10GbE bNDC NIC
iDRAC – Fixes
• VNC password is not retained in iDRAC after an iDRAC reboot.
•
Assertion of PSx-PG-Fail in the SEL is automatically de-asserted upon recovery of PSU-Good or removal of
related PSU.
•
The BIOS configuration job completes with errors when the Virtualization Technology setting is changed.
The job status displays an error though the settings are successfully applied.
•
The WS-MAN interface stops functioning when running several WS-MAN sessions simultaneously.
•
Auto Config may not apply the XML configuration changes if the host system is turned on or while using the
Enable Once After Reset DHCP provisioning option.