Users Guide

Menu Item Description

User Defined Delay

(60s to 240s)

Allows you to set the User Defined Delay when the User Defined option for AC

Power Recovery Delay is selected.

Miscellaneous settings

Menu Item Description

System Time Allows you to set the time on the system.

System Date Allows you to set the date on the system.

Asset Tag Displays the asset tag and allows you to modify it for security and tracking

purposes.

Keyboard

NumLock

Allows you to set whether the system boots with the NumLock enabled or

disabled. By default the Keyboard NumLock is set to On.

NOTE: This option does not apply to 84-key keyboards.

Report Keyboard

Errors

Allows you to set whether keyboard-related error messages are reported during

system boot. By default, the Report Keyboard Errors option is set to Report.

F1/F2 Prompt on

Error

Allows you to enable or disable the F1/F2 prompt on error. By default, F1/F2

Prompt on Error is set to Enabled.

In-System

Characterization

This option enables or disables In-System Characterization. By default, In-System

Characterization is set to Enabled.

System and setup password features

You can create a system password and a setup password to secure your system. To enable creation of

the system and setup password, the password jumper must be set to enabled. For more information on

the password jumper settings, see System Board Jumper Settings.

System

password

This is the password that you must enter before you can boot your system.

Setup

password

This is the password that you must enter to access and make changes to the BIOS

or UEFI settings of your system.

CAUTION: Avoid leaving your system running and unattended. Enabling the password feature

provides a basic level of security for the data on your system.

NOTE: Your system is shipped with the system and setup password feature disabled.

Assigning a system or setup password

NOTE: The password jumper enables or disables the System Password and Setup Password

features. For more information on the password jumper settings, see “System board jumper

settings”.