Release Notes

Issue 6:
Description
Lifecycle Controller may go into an infinite loop when a network operation is tried with an incorrect NFS
share name.
Resolution
Restart Lifecycle Controller and retry the operation with the correct NFS share name details.
Versions/Systems Affected
All LC–supported Dell PowerEdge servers.
Issue 7:
Description
In the
Firmware Rollback – Select Components
page, the iDRAC version is displayed as 2.02.01.00
instead of 2.02.01.01.
Resolution
Issue is with the version number that is displayed and this does not affect the functionality. You can
continue with the rollback operation.
Versions/Systems Affected
All LC–supported Dell PowerEdge servers.
Issue 8:
Description
Intel I350 Gigabit embedded network firmware cannot be updated using the LC GUI or any other
interfaces using LC-RS.
Resolution
Update the firmware using the Windows (.exe) or Linux (.bin) executable formats.
Versions/Systems Affected
All LC–supported Dell PowerEdge servers.
Issue 9:
Description
On the Dell 12th generation PowerEdge servers, while deploying the operating system by selecting the
UEFI boot mode, an error message is displayed when you click
Finish
. This error occurs if you try to
connect the optical drive or virtual media after you launch Lifecycle Controller.
Resolution
Reboot the server and ensure that you connect the optical drive or virtual media before launching
Lifecycle Controller.
Versions/Systems Affected
All LC–supported Dell PowerEdge servers.