Release Notes

Versions/ Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 55:
Description
After resetting iDRAC configuration to defaults, the old iDRAC sessions remain active and new users
cannot be created.
Resolution
Reboot iDRAC or perform an AC power cycle to clear the issue.
Versions/ Systems Affected
Dell 12th generation PowerEdge systems with iDRAC8.
Issue 56:
Description
The BIOS configuration job completes with errors when Virtualization Technology is set to
Enabled
or
Disabled
. All the settings are successfully applied, however, the job status displays an error.
Resolution
None.
Versions/ Systems Affected
All PowerEdge systems with iDRAC8.
Issue 57:
Description
On the Dell 12th generation PowerEdge servers flashed with iDRAC8, firmware update and configuration
operations including secure erase for Samsung NVMe PCIe SSDs using iDRAC interfaces, do not work.
Even though you can start these tasks using iDRAC interfaces, the tasks will eventually fail.
Resolution
Use other methods of firmware update and configuration using the operating system.
Versions/ Systems Affected
Dell 12th generation PowerEdge systems with iDRAC8.
Issue 58:
Description
Creating T10 PI capable virtual disks using T10 PI capable disk-drives from iDRAC GUI fails.
Resolution
Use RACADM, WS-MAN, or OMSS to create virtual disks with T10 PI capability.
Versions/ Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 59:
Description
On the Dell 12th generation PowerEdge systems, when downgrading from 2.10.10 to 1.66.65, existing
users may occasionally be lost.
Resolution
Re-enter the users after the downgrade. It is recommended that you check the custom settings while
upgrading or downgrading the firmware.