Release Notes

No action required.
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 32:
Description
In the iDRAC web interface, the following storage pending operations status is not displayed in Pending
Operations pop-up message and
Storage
->
Pending Operations
page:
• Virtual Disk(s) - Encrypt operations.
• Controller(s) - Create, Modify, or Delete security key operations.
• Controller(s) - Import or Clear Foreign Configuration operations.
• PCIe SSD(s) - Secure Erase or Prepare to Remove operations.
Resolution
None.
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 33:
Description
When a passive backplane (that is not connected to PERC) is updated from the operating system, the
System Inventory
page in the iDRAC web interface does not display the updated version.
Resolution
Reset iDRAC using racadm racreset command.
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 34:
Description
If you log in to the iDRAC8 web interface with Login and Config iDRAC privilege, then on the
Update and
Rollback
page, an additional
Firmware Settings
submenu appears.
Resolution
None
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 35:
Description
On the
Network Devices
page, the Initiator and Storage Target Settings table overflows to the right if you
set the initiator name and chap ID value with more than 120 characters.
Resolution
Reduce the zoom level or use the scrollbar to view the entire data.
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC8.