Release Notes

Repository update operations through iDRAC with reserved characters in user name and password may
not be successful at the DUP download stage, even when they are properly percent encoded by the user.
This does not affect other update methods.
Resolution
Use a user name and password without reserved characters and then perform an update.
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 28:
Description
On the Dell 13
th
generation PowerEdge servers, after replacing the motherboard, if you use the Easy
Restore feature to restore the UEFI Diagnostic utility, the UEFI Diagnostic is restored successfully.
However, the iDRAC web interface may not show the restored Diagnostic version in the System Inventory
page.
Resolution
Reset iDRAC.
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 29:
Description
On the Dell 13
th
generation PowerEdge servers, a clone export of a system with 64 virtual disks does not
recreate the virtual disks on the target system.
Resolution
On Clone or Replace modes of Configuration XML export, the virtual disk creation operation is set to
CreateAuto
by default. Change the operation to
Create
and specify the physical disks to be used by
FQDD to resolve this issue.
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 30:
Description
(Virtual) Keyboard stopped working on iDRAC Virtual Console, but the mouse movements continues to
work.
Resolution
Exit and restart Virtual Console. If the Virtual Media was in use, ensure that it is activated (Connect and
Map media).
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 31:
Description
Infrequently, iDRAC logs the following message to the Lifecycle Controller log:
PWR2262 "The Intel Management Engine has reported an internal system error."
Also, logs the following within the next few minutes:
PWR2264 "The Intel Management Engine has reported normal system operation."
Resolution