Release Notes

Resolution
To update the storage inventory, perform a server power cycle (cold boot) or reset the iDRAC.
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC8 and out-of-band enabled PERC storage controllers.
Issue 14:
Description
Power Cap (in Watts, BTU/hr, %) is not accepting values preceding with zero (0).
Resolution
Do not precede a zero (0) while entering value for
Power Cap
in the
Power Configuration
page.
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 15:
Description
In the
Network Interfaces
page >
Host OS Network Interfaces
section, the link to the
Network Devices
page is not available for embedded LOM.
Resolution
In the
Network Devices
page, see the FQDD detail that does not have the link.
Version/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 16:
Description
The
Print
option in iDRAC web page does not work if you are using Internet Explorer for iDRAC web
interface.
Resolution
Use the
Print
option from the browser or use other supported browsers such as Firefox, Chrome, or MAC
Safari.
Version/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 17:
Description
Relevant status is not shown when a corrupt SD card is inserted. Currently, the status is displayed as
Absent.
Resolution
Make sure a valid SD card is inserted.
Version/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 18:
Description
When you log in to the iDRAC web interface using Internet Explorer 8.x and prior versions, content in few
pages is not displayed properly and a few UI controls may not work.