Reference Guide

• To generate and view information about the inventory of fans, run the following

command:

racadm storage get fans --refkey <enclosure FQDDs separated by

comma>

racadm storage get fans --refkey <enclosure FQDDs separated by

comma > -o

racadm storage get fans --refkey <enclosure FQDDs separated by

comma> -o -p <property names separated by comma>

• To generate and view information about the inventory of EMMs, run the following

command:

racadm storage get emms -refkey <enclosure FQDDs separated by

comma>

racadm storage get emms --refkey <enclosure FQDDs separated by

comma> -o

racadm storage get emms --refkey <enclosure FQDDs separated by

comma> -o -p <property names separated by comma>

• To generate and view information about the inventory of PSU, run the following

command:

racadm storage get psus -refkey <enclosure FQDDs separated by

comma>

racadm storage get psus --refkey <enclosure FQDDs separated by

comma> -o

racadm storage get psus --refkey <enclosure FQDDs separated by

comma> -o -p <property names separated by comma>

Configuration

• To view the help details for a configuration command, run the following command:

racadm storage help <command>

where command can take below values

converttoraid, converttononraid, controllers, clearconfig,

createsecuritykey, createvd, deletesecuritykey, deletevd,

encryptvd, enclosures, emms, fans, hot-spare, importconfig,

ccheck, secureerase, preparetoremove, blink, unblink,

cancelcheck, init, modifysecuritykey, psus, pdisks,

resetconfig, tempprobes, vdisks, and patrolread.

• To create, delete, and secure the virtual disks. To start or stop the consistency check

on the specified virtual disk, run the following command:

racadm storage createvd:<Controller FQDD> -rl {r0|r1|r5|r6|r10|

r50|r60}[-wp {wt|wb|wbf}] [-rp {nra|ra|ara}] [-ss {1k|2k|4k|8k|

16k|32k|64k|128k|256k|512k|1M|2M|4M|8M|16M}]-pdkey:<comma