Reference Guide

Output If upload is successful, the message SSL key successfully uploaded to the

RAC is displayed. if upload is unsuccessful, error message is displayed.

Example

racadm sslkeyupload -t 1 -f c:\sslkey.txt

sslresetcfg

Description Restores the web-server certificate to factory default and restarts web-server. The

certificate takes effect 30 seconds after the command is entered.

To run this subcommand,you must have the Chassis Configuration Administrator

privilege.

To run this subcommand, you must have the Configure iDRAC privilege.

Synopsis

racadm sslresetcfg

Input N/A

Example

racadm sslresetcfg

Certificate generated successfully and webserver restarted.

storage

Description Allows you to run the commands to control storage arrays.

To run this subcommand for configuring the storage properties, you must have the

server control permission.

NOTE: RACADM supports inventory of software RAID objects but does not support

RAID configuration.

Synopsis

Inventory

• To view the help details for get command, run the following command:

racadm storage help get

• To generate and view information about the inventory of storage root node, run the

following command:

racadm storage get status

• To generate and view information about the inventory of controllers, run the

following command:

racadm storage get controllers -o

racadm storage get controllers -o -p <property names separated

by comma>

• To get the list of controllers, run the following command:

racadm storage get controllers

• To get the properties of PCIeSSD controller, run the following command:

racadm storage get controllers:<PcieSSD controller FQDD>