Reference Guide

wilU2VLw/iRH1ZymUFnut8ggbPQgqV2L8bsUaMqb5PooIIvV6hy4isCNJU=
1024-bit RSA, converted from OpenSSH by [e-mail]
Key ID 2:
Key ID 3:
Key ID 4:
sslcertdownload
Description
Downloads an SSL certificate from iDRAC to the client’s file system.
Downloads an SSL certificate from CMC to the client’s file system.
To run this subcommand, you must have the Server Control privilege.
NOTE: This subcommand is only supported on the remote interface(s).
Synopsis
racadm sslcertdownload -f <filename> -t <type>
Input
• -f — Specifies the target filename on local file system to download the certificate.
• -t <type> — Specifies the type of certificate to download, either the CA certificate
for Directory Service or the server certificate.
– 1=server certificate
– 2=Active Directory
Output Returns 0 when successful and non-zero number when unsuccessful.
Example
• Download server certificate:
racadm -r 192.168.0 -u root -p xxx sslcertdownload -t 1 -f
cert.txt
• Download Active Directory certificate:
racadm -r 192.168.0 -u root -p xxx sslcertdownload -t 2 -f
ad_cert.txt
NOTE: This command is not supported in the firmware RACADM interface as it is not a file system.
sslcertupload
Description
Uploads a custom SSL server or CA certificate for Directory Service from the client to
iDRAC.
Uploads a custom SSL server or CA certificate for Directory Service from the client to
CMC.
To run this subcommand, you must have the Server Control privilege.
92