Reference Guide

• -k — Option has following legal values: no arguments imply autonegotiate

<speed>=10, 100 <duplex> =half, full.

NOTE:

• -o, -k, -p: These options can be specified for chassis only

• -6: Sets static IPv6 addresses (with -soption). Enables autoconfig for IPv6

(with

-d option) disables IPv6 (with-p option) can be specified for chassis or

servers.

• -v: When performing on a switch, release and renew any DHCP lease on that

port for changes to take effect.

Example

• To Configure static IPv4 address for iDRAC NIC

racadm setniccfg -s 192.168.0 255.255.255.0 192.168.0

Static IP configuration enabled and modified successfully

• Configure DHCP mode for iDRAC IPv4

racadm setniccfg -d

DHCP is now ENABLED

• Configure DHCP mode for iDRAC IPv6

racadm setniccfg -d6

DHCP6 is now ENABLED

• Configuration of Speed= 100 Mbps and duplex= full duplex.

racadm setniccfg -k 100 full

• Configuration of Speed and Duplex to Autonegotiate.

racadm setniccfg -k

• Configuration of VLAN id and priority of a slot or all blades in a sleeve.

racadm setniccfg -i 5 -v 1000 7

• Configuration of CMC to a static IPv6 address.

racadm setniccfg -m chassis -s -6 2001:DB8::2 64 2001:DB8::1

• Configuration of server to use stateless autoconfiguration address.

racadm setniccfg -m server-1 -d -6

• Configuration of VLAN id and priority for a switch.

racadm setniccfg -m switch-1 -v 1000 7

• Removal of VLAN configuration from a switch.

racadm setniccfg -m switch-1 -v

• Configuration of redundant mode

racadm setniccfg -r 1

sshpkauth

Description Enables you to upload and manage up to 4 different SSH public keys for each user. You

can upload a key file or key text, view keys, or delete keys.

This command has three mutually exclusive modes determined by the options —

upload, view, and delete.

To run this subcommand, you must have Configure user privilege.