Reference Guide

• racadm hwinventory NIC.Integrated.1-1
Examples
• Displays the statistics for the NIC FQDD.
$racadm nicstatistics <NIC FQDD>
• Displays the statistics for the integrated NIC.
$ racadm nicstatistics NIC.Integrated.1-1
Total Bytes Received:0
Total Bytes Transmitted: 0
Total Unicast Bytes Received: 0
Total Multicast Bytes Received: 0
Total Broadcast Bytes Received: 0
Total Unicast Bytes Transmitted: 0
• Get the network statistics.
$ racadm nicstatistics
NIC.Slot.5-2-1 : QLogic CNA Gigabit Ethernet-B8:AC:6F:B3:BF:10
NIC.Slot.5-2-1 : QLogic CNA Gigabit Ethernet-B8:AC:6F:B3:BF:11
NIC.Slot.5-2-1 : QLogic CNA Gigabit Ethernet-B8:AC:6F:B3:BF:12
NIC.Slot.5-2-1 : QLogic CNA Gigabit Ethernet-B8:AC:6F:B3:BF:13
NIC.Slot.5-2-1 : QLogic CNA Gigabit Ethernet-B8:AC:6F:B3:BF:14
ping
Description Verifies if the destination IP address is reachable from CMC with the current routing-
table contents. A destination IP address is required. Based on the current routing-table
contents, an ICMP echo packet is sent to the destination IP address.
To run this subcommand, you must have the Administrator privilege.
To run this subcommand, you must have the Debug privilege.
Synopsis
racadm ping <ipaddress>
Input <ipaddress> — The IP address of the remote endpoint to ping.
Output
PING 192.168.0 (192.168.0): 56 data bytes64 bytes from 192.168.0:
seq=0 ttl=64 time=4.121 ms
192.168.0 ping statistics
1 packets transmitted, 1 packets received, 0 percent packet
lossround-trip min/avg/max = 4.121/4.121/4.121 ms
72