Reference Guide

NOTE: If a file with the specified filename exists, then the older file is replaced

with the new history file.

• -u — User name of the remote share to export the file. Specify user name in a

domain as domain or username.

• -p — Password for the remote share to where the file must be exported.

• -l — Network share location to where the inlet temperature history must be

exported. The maximum length of this parameter is 256 characters.

NOTE: Export to an IPv6 NFS share is not supported.

• -t — Specifies the exported file type. Valid values are xml and csv. These values are

case-insensitive.

NOTE: From firmware RACADM, only export to a remote share is supported. The

behavior of remote share is not defined when the path specified (-l) contains

special characters.

Example

• Export the log to a remote CIFS share.

racadm inlettemphistory export -f Mylog.xml -u admin -p xxx -

l //1.2.3.4/share -t xml

• Export the log to local file system using Local RACADM.

racadm inlettemphistory export -f Mylog.xml -t xml

• Export the log to management station using Remote RACADM.

racadm -r 1.2.3.4 -u user -p xxx inlettemphistory export -f

Mylog.csv -t csv

• View the inlet temperature history.

racadm inlettemphistory get

Duration Above Warning Threshold as Percentage = 0.0%

Duration Above Critical Threshold as Percentage = 0.0%

Average Temperatures

Last Hour = 23C ( 73.4F )

Last Day = 24C ( 75.2F )

Last Week = 24C ( 77.0F )

Last Month = 25C ( 77.0F )

Last Year = 23C ( 73.4F )

Peak Temperatures

Last Hour = 23C ( 73.4F ) [At Wed, 30 May 2012 11:00:57]

Last Day = 25C ( 77.0F ) [At Tue, 29 May 2012 15:37:23]

Last Week = 27C ( 80.6F ) [At Fri, 25 May 2012 10:38:20]

Last Month = 29C ( 84.2F ) [At Wed, 16 May 2012 15:34:13]

Last Year = 29C ( 84.2F ) [At Wed, 16 May 2012 15:34:13]

jobqueue

Description Enables you to view and delete a job or jobs in the current Job Queue.