Reference Guide

RAID-PERC H310

Mini

20.10.1-0084 2012-02-09

BP12G+ 0:1 0.16 1999-12-31

racadm getversion -l -m server-1 -f bios

server-1 BIOS 1.6.0 2013-01-09

hwinventory

Description Allows you to display or export current internal hardware inventory or shipped

hardware inventory by device.

NOTE: If more than one session is initiated for hwinventory, only one session

displays the output. The other sessions display the following error message:

Unable to retrieve the hardware inventory. Another hardware

inventory operation may already be in progress and must

complete before retrying the operation. If no other hardware

inventory process is in progress,make sure to enable Collect

System Inventory On Restart (CSIOR) feature, reboot the

system, and then retry the operation. If CSIOR feature is

enabled and no other hardware inventory operation is in

progress, use the

racadm racreset command to reboot iDRAC,

and then retry the operation.

Synopsis

• racadm hwinventory

• racadm hwinventory NIC|FC

• racadm hwinventory <FQDD>

• racadm hwinventory export -f <filename> -u <username> -p

Input

• <FQDD> — Specifies the FQDD of the target device.

– FQDD — NIC.Slot.1–2

• -f — Exported Hardware Inventory filename.

• -u — Username of the remote share to where the file must be exported. Specify

user name in a domain as

domain/username

• -p — Password for the remote share to where the file must be exported.

• -l — Network share location to where the Hardware Inventory must be exported.

Examples

To get the list of NIC FQDDs

racadm hwinventory nic

NIC.Slot.2-1-1:Emulex OCe14102-U1-D - 00:90:FA:4C:FE:C2

PartitionCapable : 1

NIC.Slot.2-1-2:Emulex OCe14102-U1-D - 00:90:FA:4C:FE:C3