Reference Guide

• -c — Specifies the number of records to display.

• -s — Specifies the starting record to display.

Output

The default output display shows the record number, timestamp, source and

description. The timestamp begins at midnight, January 1 and increases until the system

starts. After the system starts, the system’s timestamp is used.

Example

• Display entire log

racadm gettracelog

• Display number of records in log

racadm gettracelog -i

Total Records: 228

getversion

Description Displays the current software version, model and generation information, and whether

the target device can be updated.

Synopsis

• racadm getversion [-b | -c]

• racadm getversion

Input

• -c — Displays the server's current CPLD version.

• -b — Displays the server's current BIOS version (default is iDRAC version).

• -f <filter> — Filters the components and must be one of the following values:

– bios: BIOS

– idrac: iDRAC

– lc: Lifecycle Controller

Example

• Displays the version for server 4.

racadm getversion -m server-4

• Displays the Lifecycle Controller component versions for servers 1 and 3.

racadm getversion -l -m server-1 -m server-3

racadm getversion -m server-1

<iDRAC

version>

server-1 1.40.40

(Build 08)

PowerEdge M520 iDRAC Y

server-2 3.50 (Build 2) PowerEdgeM610x iDRAC6 Y

server-4 3.50 (Build 4) PowerEdgeM710H

iDRAC6

racadm getversion -c