Reference Guide

• switch-<n> — where n = 1–6

Output Any system tag as applicable.

Example

• Display Service tag of Server in Slot 1

racadm getsvctag -m server-1

• Display Service tag of all the components in the chassis

racadm getsvctag

getsysinfo

Description

Displays information related to iDRAC, managed system, and watchdog configuration.

Displays information related to CMC, managed system, and watchdog configuration.

NOTE: The host name and OS Name fields in the getsysinfo output display accurate

information only if the Dell OpenManage Server Administrator is installed on the

managed system. Else, these fields may be blank or inaccurate. An exception to this

are VMware operating system names, which are displayed even if the Server

Administrator is not installed on the managed system.

Synopsis

racadm getsysinfo [-d] [-A] [-c] [-4] [-6]

Input

• —4 — Displays IPv4 settings

• —6 — Displays IPv6 settings

• —c — Displays common settings

• —d — Displays iDRAC information

• —d — Displays CMC information

• —A — Eliminates the printing of headers or labels

Output

racadm getsysinfo

CMC Information:

CMC Date/Time = Wed Sep 17 2014 23:13

Primary CMC Location = CMC-1

Primary CMC Version = 5.00

Standby CMC Version = 5.00

Last Firmware Updated = Tue Sep 16 2014 22:11

Hardware Version = A09

CMC Network Information:

NIC Enabled = 1

MAC Address = 78:2B:CB:46:5C:8A

DNS CMC Name = cmc-effort

Current DNS Domain = cmc.com

VLAN ID = 1

VLAN Priority = 0

VLAN Enabled = 0

CMC IPv4 Information:

IPv4 Enabled = 1

Current IP Address = 192.168.0

Current IP Gateway = 192.168.0

Current IP Netmask = 255.255.255.0