Reference Guide

NOTE: On Remote RACADM, the number of logs are restricted to 25 by default.
• -i — Displays the number of entries in the CMC log.
• --more — Displays one screen at a time and prompts you to continue (similar to the
UNIX
more command).
• -s — Specifies the starting record used for the display.
NOTE: When Enhanced Chassis Logging and Events feature is enabled, then -i and
--more options are not displayed.
Output
SeqNumber = 286
Message ID = USR0005
Category = Audit
AgentID = RACLOG
Severity = Information
Timestamp = 2012-10-05 06:25:27
Message = Login failed from processdisco06a: 192.168.0
Message Arg 1 = processdisco06a
Message Arg 2 = 10.92.68.245
FQDD = iDRAC.Embedded.1
Example
• Display the starting record and the number of records.
racadm getraclog -s 10 -c 2
• Display a few records and prompt to display another set of records.
$ racadm getraclog --more
Dec 4 22:23:09 CMC-JP4BF2S Login success from 192.168.0
(username=root, type=SSH, sid=16393)
Dec 4 22:24:54 CMC-JP4BF2S Login success from 192.168.0
(username=test, type=SSH, sid=35885)
Dec 4 22:26:20 CMC-JP4BF2S Login success from 192.168.0
(username=root, type=GUI, sid=27476)
Dec 4 22:28:06 CMC-JP4BF2S Mod password of user puser succeeds
Dec 4 22:28:06 CMC-JP4BF2S Mod privileges of user puser succeeds
Dec 4 22:28:21 CMC-JP4BF2S Login success from 192.168.0
(username=puser, type=SSH, sid=39229)
Dec 4 22:29:12 CMC-JP4BF2S Mod password of user nuser succeeds
Dec 4 22:29:12 CMC-JP4BF2S Mod privileges of user nuser succeeds
Dec 4 22:29:51 CMC-JP4BF2S SSH login failed (username=nuser,
ip=192.168.0, reason=Local user fails to login )
Dec 4 22:30:23 CMC-JP4BF2S last message repeated 3 times
Dec 4 22:30:23 CMC-JP4BF2S Mod privileges of user nuser succeeds
Dec 4 22:30:38 CMC-JP4BF2S SSH login failed (username=nuser,
ip=192.168.0, reason=Local user fails to login )
[more]
• Entry in the RAC log when Extended Power Performance control is enabled or
disabled.
racadm getraclog
Jul 31 14:16:11 CMC-4C2WXF1 Log Cleared
Jul 31 14:15:49 CMC-4C2WXF1 Extended Power Performance is
Enabled
Jul 31 14:15:49 CMC-4C2WXF1 Extended Power Performance is
Disabled
• When Enhanced Logging mode is enabled, the output of getraclog is displayed
similar to chassislog output.
Using racadm config -g cfgRacTuning -o cfgRacTuneEnhancedLog 1
command, Enhanced Logging feature is enabled.
SeqNumber = 38
Message ID = USR8501
46