Reference Guide

IPv6 Enabled =0

Autoconfiguration

Enabled

Static IPv6 Address =::

Static IPv6 Gateway =::

Link Local Address =::

Current IPv6 Address 1 =::

Current IPv6 Gateway =::

Speed =Autonegotiate

Duplex =Autonegotiate

Redundant mode =0

VLAN Enable =0

VLAN ID =1

VLAN priority =0

NOTE: IPv6 information is displayed only if IPv6 is enabled in iDRAC.

NOTE: LOM Status is displayed only for iDRAC on Rack and Tower servers and is

not displayed for iDRAC Enterprise on Blade servers.

Example

• Display CMC network settings

racadm getniccfg -m chassis

• Display iDRAC network settings in server slot 1

racadm getniccfg -m server-1

getraclog

Description

The getraclog command displays RAC log entries.

The getraclog command displays CMC log entries.

Synopsis

• racadm getraclog [-i]

• racadm getraclog [-s <start>] [-c <count>] [--more]

racadm getraclog [-c <count>] [-s <start-record>] [--more]

NOTE: If options are not provided, the entire log is displayed.

Input

• -c — Specifies the number of records to display.

NOTE: On Local RACADM, the number of logs are restricted to 100 by default.

• --more — Displays one screen at a time and prompts you to continue (similar to the

UNIX

more command).

• -s — Specifies the starting record used for the display.

• -c — Specifies the number of records to display.