Reference Guide

The following table describes the firmware update method supported for each interface.

FW Update Method iDRAC on Blade Servers iDRAC on Rack and Tower Servers

Local RACADM Yes Yes

Local RACADM-TFTP Yes Yes

Local RACADM-FTP Yes Yes

Remote RACADM Yes Yes

Remote RACADM-TFTP Yes Yes

Remote RACADM-FTP Yes Yes

Firmware RACADM-TFTP Yes Yes

Firmware RACADM-FTP Yes Yes

FW Update Method CMC

Local RACADM No

Local RACADM-TFTP No

Local RACADM-FTP No

Remote RACADM Yes

Remote RACADM-TFTP Yes

Remote RACADM-FTP Yes

Firmware RACADM-TFTP Yes

Firmware RACADM-FTP Yes

get

Description Displays the object and its values.

If the values are pending, then commit and reboot job must be created using the

jobqueue command. For more information, see jobqueue.

For the configuration xml operations, check the Job ID by running the jobqueue view

command. For more information, see jobqueue.