Reference Guide

•

• -r — Event generation interval. This option is applicable only to the temperature

statistics subcategory tmps. You can use this option as a stand-alone or with -n and

-a.

NOTE: If both event generation interval and notifications are configured and there

is an error while configuring the notifications, the event generation interval is not

set. The valid values are 0–365. 0 disables the event generation.

Example

• Display all available event filter configurations:

racadm eventfilters get -c idrac.alert.all

• Display eventfilter configurations for a specific category. For example, audit:

racadm eventfilters get -c idrac.alert.audit

• Display eventfilter configurations for a specific subcategory. For example, licensing

under the audit category:

racadm eventfilters get -c idrac.alert.audit.lic

• Display eventfilter configurations for a specific severity. For example, warning under

the audit category:

racadm eventfilters get -c idrac.alert.audit.warning

• Display eventfilter configurations for a specific severity and subcategory. For

example, a severity of warning in the subcategory licensing under audit category:

racadm eventfilters get -c idrac.alert.audit.lic.warning

• Clear all available alert settings:

racadm eventfilters set -c idrac.alert.all -a none -n none

• Configure using severity as a parameter. For example, all informational events in

storage category are assigned power off as action, and email and snmp as

notifications:

racadm eventfilters set -c idrac.alert.storage.info -a poweroff

-n email,snmp

• Configure using subcategory as a parameter. For example, all configurations under

the licensing subcategory in the audit category are assigned power off as action and

all notifications are enabled:

racadm eventfilters set -c idrac.alert.audit.lic -a poweroff -n

all

• Configure using subcategory and severity as parameters. For example, all

information events under the licensing subcategory in the audit category are

assigned power off as action and all notifications are disabled:

racadm eventfilters set -c idrac.alert.audit.lic.info -a

poweroff -n none

• Configure the event generation interval for temperature statistics:

racadm eventfilters set -c idrac.alert.system.tmps.warning -r 10

• Configure the event generation interval and notifications for temperature statistics:

racadm eventfilters set -c idrac.alert.system.tmps -r 5 -a none

-n snmp

• Send a test alert for the fan event:

racadm eventfilters test -i FAN0001