Reference Guide

NOTE: To use this subcommand, you must have the Execute Debug

privilege.

Synopsis

racadm coredump

Example

• racadm coredump

There is no coredump currently available.

• racadm coredump

Feb 19 15:51:40 (none) last message repeated 5 times

Feb 19 15:52:41 (none) last message repeated 4 times

Feb 19 15:54:12 (none) last message repeated 4 times

Feb 19 15:56:11 (none) last message repeated 2 times

Feb 22 11:46:11 (none) kernel:

coredumpdelete

Description Deletes any currently available coredump data stored in the RAC.

To use this subcommand, you must have Execute Debug Command permission.

To use this subcommand, you must have Clear Logs or Execute DebugCommands

permission.

NOTE: If a coredumpdelete command is issued and a coredump is not currently

stored in the RAC, the command displays a success message. This behavior is

expected. See the coredump subcommand for more information about viewing a

coredump.

Synopsis

racadm coredumpdelete

Output

Coredump is deleted.

Example

racadm coredumpdelete

Coredump request completed successfully

diagnostics

Description Collects and exports remote diagnostics report from iDRAC.

The results of the latest successfully run remote diagnostics are available and

retrievable remotely through an NFS or a CIFS share.

Synopsis To run a remote diagnostic report:

racadm diagnostics run -m <mode> -r <reboot type> -s <start time>

-e <expiration time>

To export a remote diagnostic report:

racadm diagnostics export -f <file name> -l <NFS or CIFS share

location> -u <username> -p <password>

Input

• —m <mode> — Specifies the type of diagnostic mode. The types are:

– Collect and export remote diagnostics report from the iDRAC.