Reference Guide

System.Power.PCIeAllocation (Read or Write)
Description
Specifies PCIe power allocation for blade servers. It is applicable only for PowerEdge
M610x.
NOTE: This object only applies to servers that support PCIe Card.
Legal Values
• 0 — Disabled
• 1 — Enabled
Default Value
• 0 — For platforms that do not support PCIe cards.
• 500 W — For platforms that support PCIe cards.
Write
Privilege
Configure iDRAC
License
Required
iDRAC Express or iDRAC Enterprise
Dependency
None
System.Power.PFCEnable (Read or Write)
Description
Enables the power factor correction enable.
NOTE:
• This object is supported only for iDRAC on Rack and Tower servers.
• This object is applicable only if System.Power.Cap.Enable is set to 1.
Legal Values
• 0 — Disabled
• 1 — Enabled
Default Value
0 — Disabled
Write
Privilege
Configure iDRAC
License
Required
iDRAC Express or iDRAC Enterprise
Dependency
None
System.Power.RedundancyCapabilities (Read Only)
Description
Returns the redundancy capabilities in the form of a bitmask. This bitmask indicates the
values that are set to cfgSensorRedundancyPolicy.
NOTE: This object is not applicable for iDRAC on Blade servers.
Legal Values
• 0 — not applicable
• 1 — Non-Redundant
231