Reference Guide

System.Power.Cap.MinThreshold (Read Only)
Description
Because it is based on the current component inventory, it is the lowest calculated
power consumption of the device.
Legal Values
Values: 1–65535
Default Value Not Applicable
Write
Privilege
Not Applicable
License
Required
iDRAC Express or iDRAC Enterprise
Dependency
None
System.Power.Cap.Percent (Read or Write)
Description
Represents the maximum power as a percentage of total power that a server is allowed
to consume. To meet this cap, throttle the device.
NOTE: This value is applicable only if System.Power.Cap.Enable is set to 1.
Legal Values
Values: 0–100
Default Value
Server power threshold in percentage.
Write
Privilege
Configure iDRAC
License
Required
iDRAC Express or iDRAC Enterprise
Dependency
Enable System.Power.Cap.Enable
System.Power.Redundancypolicy (Read or Write)
Description Selects the redundancy policy.
Legal Values
• N/A
• Not Redundant — In this mode, even if one PSU stops functioning, the server is
automatically turned off.
• A/C Input Redundant — In this mode, the system is functional even if one PSU
input circuit stops functioning, provided the PSUs are connected to different
input circuits. This is also called AC redundancy.
• PSU Redundant — Available only on systems with four PSUs. This is also called
DC redundancy. This is only valid in a 2+1 PSU configuration. In this mode, the
system is functional even if one PSU stops functioning.
Default Value N/A
Write Privilege Login and configure iDRAC
222