Reference Guide

NOTE:
• While entering an attribute value that is more than one word, ensure that you enclose the
attribute value within single quotation marks in the set command.
Example:
racadm>>set system.thermalsettings.ThermalProfile 'Maximum performance'
racadm set system.thermalsettings.ThermalProfile 'Maximum performance'
[Key=system.Embedded.1#ThermalSettings.1]
Object value modified successfully
• The staged configuration has the associated pending value in the output of the get operation,
after it is configured successfully.
• The object values in the BIOS and NIC groups are case-sensitive.
• For NIC objects, the definition of the key format is: Key = <Device
Class>.<Locator>.<Device Number>—<Port Number>[-<Partition
Number>]#GroupName”
where,
– Device Class: NIC
– Locator: Integrated, Slot, Mezzanine or Embedded
Example:
$racadm get NIC.NICConfig
NIC.NICConfig.1 [Key=NIC.Integrated.1-1#NICConfig]
NIC.NICConfig.2 [Key=NIC.Integrated.1-2#NICConfig]
NIC.NICConfig.3 [Key=NIC.Integrated.1-3#NICConfig]
NIC.NICConfig.4 [Key=NIC.Integrated.1-4#NICConfig]
• The link between the NIC instance and the corresponding key varies from system to system
depending on the system configuration.
• The command racadm help provides a list of all the attributes along with the description.
• To view the help details of group level, enter the following command: racadm help <group
name>
Example:
$racadm help NIC.NICConfig
NICConfig -- (null)
These are the objects supported by the group
-------------------------------------------------------------------------
-----
BannerMessageTimeout -- Specify the number of seconds that the
OptionROM banner is displayed during POST.
Usage -- Values from 0 - 14
Required License -- RACADM
Dependency -- None
BootOptionROM -- Controls the enablement of legacy Boot
Protocols in the Option ROM.
Usage -- Enabled; Disabled
Required License -- RACADM
Dependency -- None
BootRetryCnt -- Specify the number of retries to attempt in
case of boot failure.
Usage -- NoRetry - 0;1Retry - 1; 2Retries -
2;3Retries - 3;4Retries - 4; 5Retries - 5;6Retries- 6;
IndefiniteRetries, Default - NoRetry
Required License -- RACADM
Dependency -- None
BootStrapType -- Specify the boot strap method used to boot
to the operating system.
Usage -- AutoDetect - 0;BBS - 1; Int18h - 2; Int19h-
3; Default - AutoDetect
Required License -- RACADM
Dependency -- None
HideSetupPrompt -- Specifies whether to display or hide the
legacy Option ROM setup prompt during system Power On Self Test (POST).
Usage -- Enabled; Disabled; Default - Disabled
Required License -- RACADM
Dependency -- None
LegacyBootProto -- Select a non-UEFI network boot protocol
Usage -- PXE; iSCSI; FCoE; NONE; iSCSIPrimary;
iSCSISecondary
Required License -- RACADM
Dependency -- None
209