Reference Guide

cfgVFlashSDHealth (Read Only)
Description
Displays the current health status of the vFlash SD card.
Legal Values
String:
• OK
• Warning
• Critical
• Unknown
Default
OK
cfgVFlashSDWriteProtect (Read Only)
Description
Displays whether the physical WriteProtect latch on the vFlash SD card is enabled or
disabled.
Legal Values
• 0 (vFlash is not write-protected)
• 1 (vFlash is write-protected)
Default
None
cfgVFlashPartition
This group is used to configure properties for individual partitions on the vFlash SD Card. Up to 16
partitions are supported, indexed from 1 to 16.
NOTE: For SD cards, the index value is limited to 1 because only a single partition of size 256MB is
allowed.
The following sections provide information about the objects in the cfgVFlashPartition group.
cfgVFlashPartitionIndex (Read Only)
Description
The index value of the partition.
Legal Values
Integer 1–16
Default
None
cfgVFlashPartitionSize (Read Only)
Description
Displays the size of the partition.
Legal Values
1 MB to 4 GB
Default
None
203