Reference Guide

Default
1
cfgSmartCard
This group specifies properties used to support access to iDRAC using a smart card.
The following sections provide information about the objects in the cfgSmartCard group.
cfgSmartCardLogonEnable (Read or Write)
Description
To iDRAC using a smart card, enable or disable with Remote RACADM support for
access.
NOTE: Enabling with remote RACADM is only applicable for iDRAC on Rack and
Tower Servers.
Legal Values
• 0 (Disabled)
• 1 (Enabled)
• 2 (Enabled with Remote RACADM) — It is not applicable for iDRAC Enterprise on
Blade Servers.
Default
0
cfgSmartCardCRLEnable (Read or Write)
Description
Enables or disables the Certificate Revocation List (CRL).
This object is applicable only for iDRAC on Rack and Tower Servers and not for iDRAC
Enterprise on Blade Servers.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
0
cfgNetTuning
This group enables users to configure the advanced network interface parameters for the RAC NIC. When
configured, the updated settings may take up to a minute to become active.
This group enables users to configure the advanced network interface parameters. When configured, the
updated settings may take up to a minute to become active.
NOTE: This group is applicable only for iDRAC on Rack and Tower Servers and not for iDRAC
Enterprise on Blade Servers.
CAUTION: Use extra precaution when modifying properties in this group. Inappropriate
modification of the properties in this group can result in your RAC NIC become inoperable.
198