Reference Guide

cfgVirtualBootOnce (Read or Write)
Description
Enables or disables the Virtual Media Boot Once feature of iDRAC.
If this property is enabled when the host server is rebooted, this feature attempts to start
from the virtual media devices — if the appropriate media is installed in the device.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
0
cfgVirMediaFloppyEmulation (Read or Write)
Description
When set to 0, the virtual floppy drive is recognized as a removable disk by Windows
operating systems. Windows operating systems assigns a drive letter that is C: or higher
during enumeration. When set to1, the Virtual Floppy drive is seen as a floppy drive by
Windows operating systems. Windows operating systems assigns a drive letter of
A: or
B:.
NOTE: Virtual Media has to be reattached (using cfgVirMediaAttached) for this
change to take effect.
Legal Values
• 1 (TRUE)
• 0(FALSE)
Default
0
cfgSDWriteProtect (Read Only)
Description
Displays if the physical write protect latch on the SD card is enabled or disabled.
NOTE: This command is deprecated from 12G iDRAC 1.0 release onwards. The
functionality of this command is covered by cfgVFlashSDWriteProtect. While
execution of the cfgSDWriteProtect command is successful, use the
cfgVFlashSDWriteProtect command. For more information, see
cfgVFlashSDWriteProtect Read Only.
Legal Values
• 1 (TRUE)
• 0(FALSE)
Default
0
cfgServerInfo
This group allows you to select the BIOS first boot device and provides the option to start the selected
device only once.
158