Reference Guide

This group is not applicable for iDRAC on Rack and Tower Servers.
Use this object with the config or getconfig subcommands.
To use this object property, you must have the Chassis Configuration Administrator privilege.
NOTE: You can configure a setting that does not have the hash sign (#) prefixed in the output. To
modify a configurable object, use the —o option.
The following sections provide information about the objects in the cfgOobSnmp group.
cfgOobSnmpAgentCommunity (Read or Write)
Description
Specifies the SNMP Community Name used for SNMP traps. The community string acts
as a password shared between different hosts over the network. This community string
value must match with the other hosts for any kind of communication through SNMP.
Legal Values
A string of up to 31 characters.
Default
public
Example
racadm getconfig -g cfgOobSnmp
cfgOobSnmpTrapsEnable=1
cfgOobSnmpA
gentCommunity=public
cfgOobSnmpAgentEnable (Read or Write)
Description
Enables or disables the SNMP agent in iDRAC.
Enables or disables the SNMP agent in CMC.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
0
cfgRacTuning
This group is used to configure various configuration properties, such as valid ports and security port
restrictions.
Use this object with the config or getconfig subcommands.
To use this object property, you must have the Chassis Configuration Administrator privilege.
NOTE: You can configure a setting that does not have the hash sign (#) prefixed in the output. To
modify a configurable object, use the
—o option.
To apply this setting to iDRAC, use the —m option.
150