Reference Guide

Default
0 — Do not use DHCP
NOTE: If this object is modified, then the object cfgNicUseDhcp is also modified.
cfgDNSStaticServer2(Read or Write)
Description
Specifies the static IP address for DNS server 2.
Legal Values
A Valid IPv4 Address
Default
0.0.0.0
cfgDNSStaticDomainName(Read or Write)
Description
The DNS static domain name.
Legal Values
String of up to 254 ASCII characters. Characters are restricted to alphanumeric, hyphens
and periods. At least one of the characters must be alphabetic.
NOTE: Microsoft Active Directory only supports Fully Qualified Domain Names
(FQDN) of 64 characters or fewer lengths.
Default
Null
cfgDNSStaticDomainNameFromDHCP (Read or Write)
Description
Specifies the device DNS static domain name.
Legal Values
• 0 — Do not use DHCP to get the Domain Name
• 1 — Use DHCP to get the Domain Name
Default
0 — Disabled
cfgRemoteHosts
This group provides properties that allow configuration of the SMTP server for email alerts.
This group enables/disables and configures firmware updates, NTP, remote syslogging and SMTP email
alerting.
To apply this setting to iDRAC, use the —m option.
Use this object with the config or getconfig subcommands.
To use this object property, you must have the Chassis Configuration Administrator privilege.
The following sections provide information about the objects in the cfgRemoteHosts group.
135