Reference Guide

Option Description

-r <cmcIpAddr>

Specifies the controller’s IP address.

-r <racIpAddr>

-r <racIpAddr> : <port number>

Specifies the controller’s remote IP address.

Use <port number> if the iDRAC port number is not

the default port (443).

-u <username>

Specifies the user name that is used to authenticate the

command transaction. If the-u option is used, the -p

option must be used, and the -i option (interactive) is

not allowed.

-p <password>

Specifies the password used to authenticate the

command transaction. If the -p option is used, the -i

option is not allowed.

--nocertwarn

Does not display certificate related warning message.

-i <indexnumber>

Specifies the index number for the indexed group, if

applicable.

-g <groupname>

Specifies the group name if applicable.

-o <objectname>

Specifies the object name if applicable.

Using The Autocomplete Feature

Use the autocomplete feature to:

• Display all the available RACADM commands in the alphabetical order on pressing the <Tab> key at

the prompt.

• View the complete list, enter the starting letter of the command at the prompt and press <Tab> key.

• Navigate the cursor within a command, press:

<Home> key: directs to the beginning of the command.

<End > key: directs to the end of the command.

• View the history of the commands that were run in the current session, press up and down arrow key.

• Exit the Autocomplete mode, enter Quit, Exit, or press <Ctrl+D> key.

For example:

• Example 1: [root@idrac-<username>]racadm> <press tab>

• Example 1: racadm> <press tab>

arp

autoupdatescheduler

clearasrscreen

clearpending

closessn

clrraclog