Reference Guide

iDRAC Property Database Group and

Object Descriptions

The iDRAC property database contains the configuration information for iDRAC. Associated object is

organizing data, and object group is organizing object. The IDs for the groups and objects that the

property database supports are listed in this section for iDRAC Enterprise on Blade Servers and iDRAC

Enterprise or Express on Rack and Tower Servers.

To configure iDRAC, use the group and object IDs with the RACADM subcommands.

NOTE: You can configure a setting that does not have a hash symbol (#) as the prefix in its output

name. To modify a configurable object, use the -o option.

NOTE: Racadm sets the value of objects without performing any functional validation on them. For

example, RACADM allows you to set the Certificate Validation object to 1 with the Active Directory

object set to 0, even though Certificate Validation can happen only if Active Directory is enabled.

Similarly, the

cfgADSSOEnable object can be set to 0 or 1 even if the cfgADEnable object is 0, but it

takes effect only if Active Directory is enabled.

All string values are limited to displayable ASCII characters, except where otherwise noted.

Displayable Characters

Displayable characters include the following set:

abcdefghijklmnopqrstuvwxwz

ABCDEFGHIJKLMNOPQRSTUVWXYZ

0123456789~`!@#$%^&*()_+-={}[]|\:";'<>,.?/

The following table provides an overview of the object groups applicable for iDRAC Enterprise on Blade

Servers and iDRAC on Rack and Tower Servers.

Subcommand iDRAC on Blade Servers iDRAC on Rack and Tower Servers

idRacInfo Yes Yes

cfgStaticLanNetworking

cfgRemoteHosts Yes Yes

cfgUserAdmin Yes Yes

129