Reference Guide

To run this subcommand, you must have the Execute Diagnostic Commands
permission.
Synopsis
racadm traceroute <IPv4 address>
Input IPv4 — Specifies IPv4 address.
Output
traceroute to 192.168.0.1 (192.168.0.1), 30 hops max, 40 byte
packets
1 192.168.0.1 (192.168.0.1) 0.801 ms 0.246 ms 0.253 ms
traceroute6
Description Traces the network path of routers as the packets traverse from the system to a
destination IPv6 address.
To run this subcommand, you must have the Administrator privilege.
To run this subcommand, you must have the Execute Diagnostic Commands
permission.
Synopsis
racadm traceroute6 <IPv6address>
Input <IPv6address> – Specifies IPv6 address.
Output
traceroute to fd01::1 (fd01::1) from fd01::3,
30 hops max, 16 byte packets
1 fd01::1 (fd01::1) 14.324 ms 0.26 ms 0.244 ms
update
Description
Allows you to update the firmware of devices on the server. The supported firmware
image file types are:
• .exe — Windows-based Dell Update Package (DUP)
• .d7
• .usc
• .pm
The supported catalog files are:
• .xml
• xml.gzip
122