Reference Guide

Example

racadm getsysinfo

racadm -r 192.168.0 -u username -p xxx getsysinfo

racadm -r 192.168.0 -u username -p xxx getconfig -g cfgchassispower

Remote RACADM

racadm -r <cmcIpAddr> -u <username> -p <password> <subcommand>

Example

racadm -r 192.168.0 -u root -p xxxx getsysinfo

Security Alert: Certificate is invalid - Certificate is not signed by Trusted

Third Party Continuing execution.

NOTE: The following command does not display a security error:

racadm -r 192.168.0 -u noble -p xxx getsysinfo --nocertwarn

Accessing Indexed-Based Device Groups and Objects

• To access any object, run the following syntax:

device.<group name>.[<index>].<object name>

• To display the supported indexes for a specified group, run:

racadm get device.<group name>

Example

racadm get nic.nicconfig

NIC.nicconfig.1 [Key=NIC.Integrated.1-1-1#nicconfig]

NIC.nicconfig.2 [Key=NIC.Integrated.1-2-1#nicconfig]

NIC.nicconfig.3 [Key=NIC.Integrated.1-3-1#nicconfig]

NIC.nicconfig.4 [Key=NIC.Integrated.1-4-1#nicconfig]

• To display the object list for the specified group, run:

racadm get device.<group name>.<index>

Example

racadm get nic.nicconfig.2

[Key=NIC.Integrated.1-2-1#nicconfig]

BannerMessageTimeout=5

BootStrapType=AutoDetect

HideSetupPrompt=Disabled

LegacyBootProto=NONE

LnkSpeed=AutoNeg

#VLanId=1

VLanMode=Disabled

• To display a single object for the specified group, run:

racadm get device.<group name>.<index>.<object name>

Example

racadm get nic.nicconfig.3.legacybootproto

[Key=NIC.Integrated.1-3#NICConfig]

Legacybootproto=PXE

RACADM Command Options

The following table lists the options for the RACADM command: