Reference Guide

• To view the FQDD's of system performance monitoring sensors
racadm systemperfstatistics view
[key = iDRAC.Embedded.1#SystemBoardCPUUsageStat]
[key = iDRAC.Embedded.1#SystemBoardIOUsageStat]
[key = iDRAC.Embedded.1#SystemBoardMEMUsageStat]
[key = iDRAC.Embedded.1#SystemBoardSYSUsageStat]
• To list the usage statistics of a specific sensor
racadm systemperfstatistics iDRAC.Embedded.1#SystemBoardCPUUsageStat
Minimum Readings
Last Hour = 0% [At Mon, 05 May 2014 17:13:04]
Last Day = 0% [At Mon, 05 May 2014 15:59:53]
Last Week = 0% [At Mon, 05 May 2014 15:59:53]
Maximum Readings
Last Hour = 0% [At Thu, 01 Jan 1970 00:00:00]
Last Day = 0% [At Thu, 01 Jan 1970 00:00:00]
Last Week = 0% [At Thu, 01 Jan 1970 00:00:00]
Average Readings
Last Hour = 0%
Last Day = 0%
Last Week = 0%
Peak Readings
Last Week 0% [At Mon, 05 May 2014 15:58:35]
• To reset the peak utilization of a specific sensor
racadm systemperfstatistics PeakReset iDRAC.Embedded.
1#SystemBoardCPUUsageStat
RAC1163: The peak utilization value of Out-Of-Band performance monitoring
sensor CPU Usage is successfully reset.
techsupreport
Description Allows you to perform the technical support report operations. The type of operations
are:
• collect — Collects the technical support report data to export. You can specify the
various types of logs to be included in the report.
This operation generates a Job ID. Use this Job ID to check the status of the collect
operation. To run this operation, you must have the Server Control Commands
permission.
• export — Exports the collected Tech Support Report data. To run this
subcommand, you must have the Execute Server Control Commands permission.
• getupdatetime — Gets the timestamp of the last operating system application data
collection.
• updateosapp — Updates the operating system application data collection.To run
this subcommand, you must have the Execute Server Control Commands
permission.
Synopsis
• To perform the technical support report operation by specifying the type of
operation.
racadm techsupreport <tech support report command type>
118