Reference Guide

NOTE: The -dom, -wom, or -dow option must be included in the command for the
autoupdate schedule. The * value for the options must be included within ' ' (single
quotation mark).
• If the -dom option is specified, then the -wom and -dom options are not
required.
• If the-wom option is specified, then the-dow is required and -dom is not
required.
• If the-dom option is non-'*', then the schedule repeats by month.
• If the-wom option is non-'*', then the schedule repeats by month.
• If the-dom and -wom options are '*' and the -dow option is non-'*', then the
schedule repeats by week.
• If all the three -dom, -wom and -dow options are '*', then the schedule repeats
by day.
• -rp: Specifies the repeat parameter. This parameter must be specified.
– If the-dom option is specified, then the valid values for -rp are 1–12.
– If the-wom option is specified, then the valid values for -rp are 1–52
– If the-dow option is specified, then the valid values for -rp are 1–366.
• -mb: Specifies the maximum backup parameter. For --vflash maximum backup is
1.
NOTE:
• Avoid using the -l, -u, and -p options with --vFlash option.
• If a backup file is created in a subfolder within the CIFS shared folder, then the
subfolder name must be mentioned in the filename option.
Output Job ID is displayed when the back up or restore operation is successful.
Example
• Back up system to CIFS share and encrypt the data.
racadm systemconfig backup -f image.img -l //192.168.0/share -u
admin -p xxx -n Encryptp@sswd123
• Back up system to NFS share and encrypt the data.
racadm systemconfig backup -f image.img -l 192.168.0 :/share -u
admin -p xxx -n Encryptp@sswd123
• Back up system to vFlash SD.
racadm systemconfig backup --vFlash
• Restore system from vFlash SD and clear the VD configurations.
racadm systemconfig restore -vFlash --nopreserve
• Restore system from NFS share without clearing the VD configurations.
racadm systemconfig restore -f image.img -l 192.168.0:/share -u
admin -p xxx
• Create a backup file in a subfolder within the CIFS shared folder.
racadm systemconfig backup –f rts/Backup.img –l //192.168.0/
CIFSshare –u username –p xxx
• To enable or disable AutoBackupScheduler.
racadm set lifecyclecontroller.lcattributes.autobackup 1
racadm set lifecyclecontroller.lcattributes.autobackup 0
• AutoBackup system to CIFS share and encrypt the data.
racadm systemconfig backup -f image.img -l //192.168.0/share -u
admin -p xxx -n encryptpasswd123 -time 14:30 -dom 1 -rp 6 -mb 10
116