Reference Guide

STOR089 : Successfully accepted the storage configuration operation.
To apply the configuration operation, create a configuration job with --
realtime option.
To create the required commit jobs, run the jobqueue command.
For more information about the jobqueue command, enter the RACADM command
"racadm help jobqueue”
• To perform a secure erase operation on the specified PCIeSSD device, run the following command:
racadm storage secureerase: Disk.Bay.8:Enclosure.Internal.
0-1:PCIeExtender.Slot.3
RAC1040 : Successfully accepted the storage configuration operation.
To apply the configuration operation, create a configuration job, and then
restart the server.
To create the required commit and reboot jobs, run the jobqueue command.
For more information about the jobqueue command, enter the RACADM command
"racadm help jobqueue”
swinventory
Description Displays the list of software objects and associated properties installed on a server.
NOTE: Lifecycle Controller and CSIOR may not be enabled to run this
subcommand.
Synopsis
racadm swinventory
Input
racadm swinventory
Output
racadm swinventory
------------------SOFTWARE INVENTORY-------------------
ComponentType = FIRMWARE
ElementName = Power Supply.Slot.2
FQDD = PSU.Slot.2
InstallationDate = 2013-06-11T13:02:46Z
Current Version = 07.2B.7D
---------------------------------------------------------------
ComponentType = FIRMWARE
ElementName = Integrated Remote Access Controller
FQDD = iDRAC.Embedded.1-1
InstallationDate = NA
Rollback Version = 1.50.50
----------------------------------------------------------------
ComponentType = FIRMWARE
ElementName = Integrated Remote Access Controller
FQDD = iDRAC.Embedded.1-1
InstallationDate = 2013-06-11T13:02:48Z
Current Version = 1.50.50
systemconfig
Description Enables you to to perform the following:
• Back up and restore for iDRAC and entire system configuration.
• Automatic scheduling of backup operation.
• View the auto backup feature settings.
• Clear the auto backup feature settings.
114