Reference Guide

– To generate and view information about the inventory of virtual disks, run the following command:
racadm storage get vdisks -o
Disk.Virtual.2:RAID.Integrated.1-1
Status Ok
DeviceDescription Virtual Disk 2 on Integrated RAID
Controller 1
Name OS
RollupStatus Ok
State Online
OperationalState Not applicable
Layout Raid-0
Size 278.88 GB
SpanDepth 1
AvailableProtocols SAS
MediaType HDD
ReadPolicy Read Ahead
WritePolicy Write Back
StripeSize 64K
DiskCachePolicy Default
BadBlocksFound NO
Secured NO
RemainingRedundancy 0
EnhancedCache Not Applicable
T10PIStatus Disabled
BlockSizeInBytes 512
– To generate and view information about the inventory of storage enclosures connected to the
connector.
This command displays all enclosure objects for the connector FQDD.
racadm storage get enclosures -o
Enclosure.Internal.0-1:RAID.Integrated.1-1
Status Ok
State Ready
107